At TA3 it is important to replace the steam-powered machines with more powerful and electric-powered machines.
To do this, you have to build coal-fired power plants and generators. You will soon see that your electricity needs can only be met with oil-powered power plants. So you go looking for oil. Drilling derricks and oil pumps help them get the oil. Railways are used to transport oil to the power plants.
The industrial age is at its peak.
[techage_ta3|image]
## Coal-fired Power Station / Oil-fired Power Station
The coal-fired power plant consists of several blocks and must be assembled as shown in the plan on the right. The blocks TA3 power station fire box, TA3 boiler top, TA3 boiler base, TA3 turbine, TA3 generator and TA3 cooler are required.
The boiler must be filled with water. Fill up to 10 buckets of water in the boiler.
The fire box must be filled with coal or charcoal.
When the water is hot, the generator can then be started.
Alternatively, the power plant can be equipped with an oil burner and then operated with oil.
The oil can be refilled using a pump and oil pipe.
The power plant delivers an output of 80 ku.
[coalpowerstation|plan]
### TA3 power station firebox
Part of the power plant.
The fire box must be filled with coal or charcoal. The burning time depends on the power that is requested by the power plant. Coal burns for 20 s and charcoal for 60 s under full load. Correspondingly longer under partial load (50% load = double time).
The oil burner can be filled with crude oil, fuel oil, naphtha or gasoline. The burning time depends on the power that is requested by the power plant. Under full load, crude oil burns 15 s, fuel oil 20 s, naphtha 22 s and gasoline 25 s.
Correspondingly longer under partial load (50% load = double time).
The oil burner can only hold 50 units of fuel. An additional oil tank and an oil pump are therefore advisable.
[ta3_oilbox|image]
### TA3 boiler base / top
Part of the power plant. Must be filled with water. If there is no more water or the temperature drops too low, the power plant switches off.
[ta3_boiler|image]
### TA3 turbine
The turbine is part of the power plant. It must be placed next to the generator and connected to the boiler and cooler via steam pipes as shown in the plan.
[ta3_turbine|image]
### TA3 generator
The generator is used to generate electricity. It must be connected to the machines via power cables and junction boxes.
[ta3_generator|image]
### TA3 cooler
Used to cool the hot steam from the turbine. Must be connected to the boiler and turbine via steam pipes as shown in the plan.
[ta3_cooler|image]
## Electrical current
In TA3 (and TA4) the machines are powered by electricity. To do this, the machines and generators must be connected with power cables.
TA3 has 2 types of power cables:
- Insulated cables (TA power cables) for local wiring in the floor or in buildings. These cables can be hidden in the wall or in the floor (can be "plastered" with the trowel).
- Overland lines (TA power line) for outdoor cabling over long distances. These cables are protected and cannot be removed by other players.
Several consumers and generators can be operated together in a power network. Large networks can be set up with the help of the junction boxes.
If too little electricity is provided, consumers run out.
In this context, it is also important that the functionality of Forceload blocks is understood, because generators, for example, only supply electricity when the corresponding map block is loaded. This can be enforced with a forceload block.
In TA4 there is also a cable for the solar system.
[ta3_powerswitch|image]
### TA Electric Cable
For local wiring in the floor or in buildings.
Branches can be realized using junction boxes. The maximum cable length between machines or junction boxes is 1000 m. A maximum of 1000 nodes can be connected in a power network. All generators, batteries, junction boxes and machines count as nodes.
Since the power cables are not automatically protected, the land lines (TA power line) are recommended for longer distances.
Power cables can be plastered with the trowel so they can be hidden in the wall or in the floor. All stone, clay and other blocks without "intelligence" can be used as plastering material. Dirt does not work because dirt can be converted to grass or the like, which would destroy the line.
For plastering, the cable must be clicked on with the trowel. The material with which the cable is to be plastered must be on the far left in the player inventory.
The cables can be made visible again by clicking on the block with the trowel.
In addition to cables, the TA junction box and the TA power switch box can also be plastered.
[ta3_powercable|image]
### TA Electric Junction Box
With the junction box, electricity can be distributed in up to 6 directions. Junction boxes can also be plastered (hidden) with a trowel and made visible again.
If the TechAge Info tool (wrench) is clicked on the junction box, it is shown whether the power line is powered or not.
[ta3_powerjunction|image]
### TA Power Line
With the TA power line and the electricity poles, reasonably realistic overhead lines can be realized. The power pole heads also serve to protect the power line (protection). A pole must be set every 16 m or less. The protection only applies to the power line and the poles, however, all other blocks in this area are not protected.
[ta3_powerline|image]
### TA Power Pole
Used to build electricity poles. Is protected from destruction by the electricity pole head and can only be removed by the owner.
[ta3_powerpole|image]
### TA Power Pole Top
Has up to four arms and thus allows electricity to be distributed in up to 6 directions.
The electricity pole head protects power lines and poles within a radius of 8 m.
[ta3_powerpole4|image]
### TA Power Pole Top 2
This electricity pole head has two fixed arms and is used for the overhead lines. However, it can also transmit current downwards and upwards.
The electricity pole head protects power lines and poles within a radius of 8 m.
[ta3_powerpole2|image]
### TA Power Switch
The switch can be used to switch the power on and off. To do this, the switch must be placed on a power switch box. The power switch box must be connected to the power cable on both sides.
[ta3_powerswitch|image]
### TA Power Switch Small
The switch can be used to switch the power on and off. To do this, the switch must be placed on a power switch box. The power switch box must be connected to the power cable on both sides.
[ta3_powerswitchsmall|image]
### TA Power Switch Box
see TA power switch.
[ta3_powerswitchbox|image]
### TA3 Small Power Generator
The small power generator runs on gasoline and can be used for small consumers with up to 12 ku. Gasoline burns for 150 s under full load. Correspondingly longer under partial load (50% load = double time).
The power generator can only hold 50 units of gasoline. An additional tank and a pump are therefore advisable.
[ta3_tinygenerator|image]
### TA3 Battery Block
The battery block is used to store excess energy and automatically delivers power in the event of a power failure (if available).
The battery block is a secondary power source. This means that the generators are used first when electricity is required. The battery block will only provide power if there is insufficient electricity in the network. The same applies to the current consumption. Therefore, no battery can be charged with another battery.
The battery delivers 10 ku or takes up 10 ku.
At full load, a battery can take up to 400 s of current and, when it is full, also release it again. This corresponds to 8 hours of playing time on a normal game day of 20 minutes.
[ta3_akkublock|image]
### TA3 Power Terminal
The power terminal must be connected to the power grid. It shows data from the power grid.
Only the data of a selected type are output in the upper half. If, for example, "Power station" is selected as the type, only the data from oil and coal-fired power stations are collected and output. The data from generators (power delivery) and the data from energy storage devices (power consumption) are output on the left. In the case of the battery blocl, for example, both are output because the battery can draw and deliver power.
In the lower half, the data of all generators and storage systems of the entire electricity network are summarized.
The TA3 Electric Motor is required in order to be able to operate TA2 machines via the power grid. The TA3 Electric Motor converts electricity into axle power.
If the electric motor is not supplied with sufficient power, it goes into an fault state and must be reactivated with a right-click.
The electric motor takes max. 40 ku of electricity and provides on the other side max. 39 ku as axle power. So he consumes one ku for the conversion.
The TA3 industrial furnace serves as a supplement to normal furnaces. This means that all goods can be produced with "cooking" recipes, even in an industrial furnace. But there are also special recipes that can only be made in an industrial furnace.
The industrial furnace has its own menu for recipe selection. Depending on the goods in the industrial furnace inventory on the left, the output product can be selected on the right.
The industrial furnace requires electricity (for the fan) and fuel oil / gasoline for the burner. The industrial furnace and must be assembled as shown in the plan on the right.
The oil burner can be operated with crude oil, fuel oil, naphtha or gasoline. The burning time is 64 s for crude oil, 80 s for fuel oil, 90 s for naphtha and 100 s for gasoline.
The oil burner can only hold 50 units of fuel. An additional tank and a pump are therefore advisable.
[ta3_furnacefirebox|image]
### TA3 Furnace Top
Is part of the TA3 industrial furnace. See TA3 industrial furnace.
[ta3_furnace|image]
### TA3 Booster
Is part of the TA3 industrial furnace. See TA3 industrial furnace.
[ta3_booster|image]
## Liquids
Liquids such as water or oil can only be pumped through the special pipes and stored in tanks. As with water, there are containers (canisters, barrels) in which the liquid can be stored and transported.
It is also possible to connect several tanks using the yellow pipes and connectors. However, the tanks must have the same content and there must always be at least one yellow pipe between the tank, pump and distributor pipe.
E.g. It is not possible to connect two tanks directly to a distributor pipe.
The liquid filler is used to transfer liquids from containers to tanks. The plan shows how canisters or barrels with liquids are pushed into a liquid filler via pushers. The container is emptied in the liquid filler and the liquid is led down into the tank.
The liquid filler can also be placed under a tank to empty the tank.
[ta3_tank|plan]
### TA3 Tank
Liquids can be stored in a tank. A tank can be filled or emptied using a pump. To do this, the pump must be connected to the tank via a pipe (yellow pipes).
A tank can also be filled or emptied manually by clicking on the tank with a full or empty liquid container (barrel, canister). It should be noted that barrels can only be completely filled or emptied. If, for example, there are less than 10 units in the tank, this remainder must be removed with canisters or pumped empty.
A TA3 tank can hold 1000 units or 100 barrels of liquid.
[ta3_tank|image]
### TA3 Pump
The pump can be used to pump liquids from tanks or containers to other tanks or containers. The pump direction (arrow) must be observed for the pump. The yellow lines and connectors also make it possible to arrange several tanks on each side of the pump. However, the tanks must have the same content.
The TA3 pump pumps 4 units of liquid every two seconds.
Note 1: The pump must not be placed directly next to the tank. There must always be at least a piece of yellow pipe between them.
[ta3_pump|image]
### TA Liquid Filler
The liquid filler is used to transfer liquids between containers and tanks.
- If the liquid filler is placed under a tank and empty barrels are put into the liquid filler with a pusher or by hand, the contents of the tank are transferred to the barrels and the barrels can be removed from the outlet
- If the liquid filler is placed on a tank and if full containers are put into the liquid filler with a pusher or by hand, the content is transferred to the tank and the empty containers can be removed on the exit side
It should be noted that barrels can only be completely filled or emptied. If, for example, there are less than 10 units in the tank, this remainder must be removed with canisters or pumped empty.
[ta3_filler|image]
### TA4 Pipe
The yellow pipes are used for the transmission of gas and liquids.
The maximum pipe length is 100 m.
[ta3_pipe|image]
### TA3 Pipe Wall Entry Blocks
The blocks serve as wall openings for tubes, so that no holes remain open.
In order to run your generators and stoves with oil, you must first look for oil and build a derrick and then extract the oil.
TA3 oil explorer, TA3 oil drilling box and TA3 pump jack are used for this.
[techage_ta3|image]
### TA3 Oil Explorer
You can search for oil with the oil explorer. To do this, place the block on the floor and right-click to start the search. The oil explorer can be used above ground and underground at all depths.
The chat output shows you the depth to which oil was searched and how much oil (petroleum) was found.
You can click the block multiple times to search for oil in deeper areas. Oil fields range in size from 4,000 to 20,000 items.
If the search was unsuccessful, you have to move the block approx. 16 m further.
The oil explorer always searches for oil in the whole map block and below, in which it was set. A new search in the same map block (16x16 field) therefore makes no sense.
If oil is found, the location for the derrick is displayed. You have to erect the derrick within the area shown, it is best to mark the spot with a sign and protect the entire area against foreign players.
Don't give up looking for oil too quickly. If you're unlucky, it can take a long time to find an oil well.
It also makes no sense to search an area that another player has already searched. The chance of finding oil anywhere is the same for all players.
The oil explorer can always be used to search for oil.
[ta3_oilexplorer|image]
### TA3 Oil Drill Box
The oil drill box must be placed in the position indicated by the oil explorer. Drilling for oil elsewhere is pointless.
If the button on the oil drilling box is clicked, the derrick is erected above the box. This takes a few seconds.
The oil drilling box has 4 sides, at IN the drill pipe has to be delivered via pusher and at OUT the drilling material has to be removed. The oil drilling box must be supplied with power via one of the other two sides.
Once the oil field has been reached, the derrick can be dismantled and the box removed.
[ta3_drillbox|image]
### TA3 Oil Pumpjack
The oil pump (pump-jack) must now be placed in the place of the oil drilling box. The oil pump also requires electricity (16 ku) and supplies one unit of oil every 8 s. The oil must be collected in a tank. To do this, the oil pump must be connected to the tank via yellow pipes.
Once all the oil has been pumped out, the oil pump can also be removed.
[ta3_pumpjack|image]
### TA3 Drill Pipe
The drill pipe is required for drilling. As many drill pipe items are required as the depth specified for the oil field. The drill pipe is useless after drilling, but it also cannot be dismantled and remains in the ground. However, there is a tool to remove the drill pipe blocks (-> Tools -> TA3 drill pipe pliers).
[ta3_drillbit|image]
### Oil tank
The oil tank is the large version of the TA3 tank (see liquids -> TA3 tank).
The large tank can hold 4000 units of oil, but also any other type of liquid.
[oiltank|image]
## Oil Transportation
### Oil transportation by Tank Carts
Tank carts can be used to transport oil from the oil well to the oil processing plant. A tank cart can be filled or emptied directly using pumps. In both cases, the yellow pipes must be connected to the tank cart from above.
The following steps are necessary:
- Place the tank cart in front of the rail bumper block. The bumper block must not yet be programmed with a time so that the tank cart does not start automatically
- Connect the tank cart to the pump using yellow pipes
- Switch on the pump
- Program the bumper with a time (10 - 20 s)
This sequence must be observed on both sides (fill / empty).
[tank_cart | image]
### Oil transportation with barrels over Minecarts
Canisters and barrels can be loaded into the Minecarts. To do this, the oil must first be transferred to barrels. The oil barrels can be pushed directly into the Minecart with a pusher and tubes (see map). The empty barrels, which come back from the unloading station by Minecart, can be unloaded using a hopper, which is placed under the rail at the stop.
It is not possible with the hopper to both **unload the empty barrels and load the full barrels at a stop**. The hopper immediately unloads the full barrels. It is therefore advisable to set up 2 stations on the loading and unloading side and then program the Minecart accordingly using a recording run.
The plan shows how the oil can be pumped into a tank and filled into barrels via a liquid filler and loaded into Minecarts.
For the Minecarts to start again automatically, the bumper blocks must be configured with the station name and waiting time. 5 s are sufficient for unloading. However, since the pushers always go into standby for several seconds when there is no Minecart, a time of 15 or more seconds must be entered for loading.
[ta3_loading|plan]
### Tank Cart
The tank truck is used to transport liquids. Like tanks, it can be filled with pumps or emptied. In both cases, the yellow tube must be connected to the tank truck from above.
100 units fit in the tank truck.
[tank_cart | image]
### Chest Cart
The chest cart is used to transport items. Like chests, it can be filled or emptied using a pusher.
Oil is a mixture of substances and consists of many components. The oil can be broken down into its main components such as bitumen, fuel oil, naphtha, gasoline and propane gas via a distillation tower.
To do this, the reboiler must be supplied with oil via a pump.
[reboiler|image]
## Logic / Switching Blocks
In addition to the tubes for goods transport, as well as the gas and power pipes, there is also a wireless communication level through which blocks can exchange data with each other. No lines have to be drawn for this, the connection between transmitter and receiver is only made via the block number. All blocks that can participate in this communication show the block number as info text if you fix the block with the mouse cursor.
Which commands a block supports can be read out and displayed with the TechAge Info Tool (wrench).
The simplest commands supported by almost all blocks are:
-`on` - to turn on block / machine / lamp
-`off` - to turn off the block / machine / lamp
With the help of the TA3 Terminal, these commands can be tried out very easily. Suppose a signal lamp is number 123.
Then with:
cmd 123 on
the lamp can be turned on and with:
cmd 123 off
the lamp can be turned off again. These commands must be entered in the input field of the TA3 terminal.
Commands such as `on` and` off` are sent to the recipient without a response coming back. These commands can therefore be sent to several receivers at the same time, for example with a push button / switch, if several numbers are entered in the input field.
A command like `state` requests the status of a block. The block then sends its status back. This type of confirmed command can only be sent to one recipient at a time.
This command can also be tested with the TA3 terminal on a pusher, for example:
cmd 123 state
Possible responses from the pusher are:
-`running` -> I'm working
-`stopped` -> switched off
-`standby` -> nothing to do because source inventory is empty
-`blocked` -> can't do anything because target inventory is full
This status and other information is also output when the wrench is clicked on the block.
[ta3_logic|image]
### TA3 Button / Switch
The button/switch sends `on` / `off` commands to the blocks that have been configured via the numbers.
The button/switch can be configured as a button or a switch. If it is configured as a button, the time between the `on` and `off` commands can be set.
The checkbox "public" can be used to set whether the button can be used by everyone (set) or only by the owner himself (not set).
Note: With the programmer, block numbers can be easily collected and configured.
The TA3 logic block can be programmed in such a way that one or more input commands are linked to one output command and sent. This block can therefore replace various logic elements such as AND, OR, NOT, XOR etc.
Input commands for the logic block are `on` /` off` commands.
Input commands are referenced via the number, e.g. `1234` for the command from the sender with the number 1234.
The same applies to output commands.
A rule is structured as follows:
```
<output> = on/off if <input-expression> is true
```
`<output>` is the block number to which the command should be sent.
`<input-expression>` is a boolean expression where input numbers are evaluated.
The blocking time defines a pause after a command, during which the logic block does not accept any further external commands. Commands received during the blocking period are thus discarded. The blocking time can be defined in seconds.
The repeater sends the received signal to all configured numbers.
This can make sense, for example, if you want to control many blocks at the same time. The repeater can be configured with the programmer, which is not possible with all blocks.
[ta3_repeater|image]
### TA3 Sequencer
The sequencer can send a series of `on` / `off` commands, whereby the interval between the commands must be specified in seconds. You can use it to make a lamp blink, for example.
Up to 8 commands can be configured, each with target block number and pending the next command.
The sequencer repeats the commands endlessly when "Run endless" is set.
If nothing is selected, only the specified time in seconds is waited for.
[ta3_sequencer|image]
### TA3 Timer
The timer can send commands time-controlled. The time, the target number(s) and the command itself can be specified for each command line. This means that lamps can be switched on in the evening and switched off again in the morning.
[ta3_timer|image]
### TA3 Terminal
The terminal is primarily used to test the command interface of other blocks (see "Logic / switching blocks").
You can also assign commands to keys and use the terminal productively.
set <button-num><button-text><command>
With `set 1 ON cmd 123 on`, for example, user key 1 can be programmed with the command `cmd 123 on`. If the key is pressed, the command is sent and the response is output on the screen.
With these blocks you can realize doors and gates that can be opened via commands (blocks disappear) and closed again. One door controller is required for each gate or door.
The appearance of the blocks can be adjusted via the block menu.
This makes it possible to realize secret doors that only open for certain players (with the help of the player detector).
[ta3_doorblock|image]
### TA3 Door Controller
The door controller is used to control the TA3 door/gate blocks. With the door controller, the numbers of the door/gate blocks must be entered. If an `on` / `off` command is sent to the door controller, this opens/closes the door or gate.
The Door Controller II can remove and set all types of blocks. To teach in the Door Controller II, the "Record" button must be pressed. Then all blocks that should be part of the door / gate must be clicked. Then the "Done" button must be pressed. Up to 16 blocks can be selected. The removed blocks are saved in the controller's inventory. The function of the controller can be tested manually using the "Remove" or "Set" buttons. If an `on` /`off` command is sent to the Door Controller II, it removes or sets the blocks as well.
Individual blocks can be set, removed or replaced by other blocks via an `exchange` command. The slot number of the inventory (1 .. 16) must be transferred as payload, i.e.:
```
$send_cmnd(node_number, "exchange", 2)
```
This can also be used to simulate extendable stairs and the like.
Detectors scan their surroundings and send an `on` command when the search is recognized.
[ta3_nodedetector|image]
### TA3 Detector
The detector is a special tube block that detects when items are passed on through the tube. To do this, it must be connected to tubes on both sides. If items are pushed into the detector with a pusher, they are automatically passed on.
It sends an `on` when an item is recognized, followed by an `off` a second later.
Then further commands are blocked for 8 seconds.
[ta3_detector|image]
### TA3 Cart Detector
The cart detector sends an `on` command if it has recognized a cart (Minecart) directly in front of it. In addition, the detector can also restart the cart when an `on` command is received.
The detector can also be programmed with its own number. In this case, he pushes all the wagons that stop near him (one block in all directions).
[ta3_cartdetector|image]
### TA3 Block Detector
The block detector sends an `on` command if it detects that blocks appear or disappear in front of it, but must be configured accordingly. After switching the detector back to the standard state (gray block), an `off` command is sent. Valid blocks are all types of blocks and plants, but not animals or players. The sensor range is 3 blocks / meter in the direction of the arrow.
[ta3_nodedetector|image]
### TA3 Player Detector
The player detector sends an `on` command if it detects a player within 4 m of the block. If the player leaves the area again, an `off` command is sent.
If the search should be limited to specific players, these player names can also be entered.
[ta3_playerdetector|image]
## TA3 Machines
TA3 has the same machines as TA2, only these are more powerful and require electricity instead of axis drive.
Therefore, only the different technical data are given below.
The injector is a TA3 pusher with special properties. It has a menu for configuration. Up to 8 items can be configured here. He only takes these items from a chest to pass them on to machines with recipes (autocrafter, industrial furnace and electronic fab).
When passing on, only one position in the inventory is used in the target machine. If, for example, only the first three entries are configured in the injector, only the first three storage locations in the machine's inventory are used. So that an overflow in the machine inventory is prevented.
The injector can also be switched to "pull mode". Then he only pulls items out of the chest from the positions that are defined in the configuration of the injector. In this case, item type and position must match. This allows to empty specific inventory entries of a chest.
The processing power is up to 8 times one item every 4 seconds.
The Techage Info Tool (wrench) has several functions. It shows the time, position, temperature and biome when an unknown block is clicked on.
If you click on a TechAge block with command interface, all available data will be shown (see also "Logic / switching blocks").
In the case of power junction boxes, the neighboring network participants (up to 50 meters away) are displayed with a blue cage.
[ta3_end_wrench|image]
### TechAge Programmer
With the programmer, block numbers can be collected from several blocks with a right click and written into a block like a button / switch with a left click.
If you click in the air, the internal memory is deleted.
[ta3_programmer|image]
### TechAge Trowel / Trowel
The trowel is used for plastering power cables. See also "TA power cable".
[ta3_trowel|image]
### TA3 drill pipe wrench
This tool can be used to remove the drill pipe blocks if, for example, a tunnel is to pass through there.
