techage_modpack/minecart/doc.lua

--[[

	Minecart
	========

	Copyright (C) 2019-2021 Joachim Stolberg

	MIT
	See license.txt for more information
	
]]--


minecart.doc = {}

if not minetest.get_modpath("doc") then
	return
end

local S = minecart.S

local summary_doc = table.concat({
	S("Summary"),
	"------------",
	"",
	S("1. Place your rails and build a route with two endpoints. Junctions are allowed as long as each route has its own start and endpoint."),
	S("2. Place a Railway Buffer at both endpoints (buffers are always needed, they store the route and timing information)."),
	S("3. Give both Railway Buffers unique station names, like Oxford and Cambridge."),
	S("4. Place a Minecart at a buffer and give it a cart number (1..999)"),
	S("5. Drive from buffer to buffer in both directions using the Minecart(!) to record the routes (use 'right-left' keys to control the Minecart)."),
	S("6. Punch the buffers to check the connection data (e.g. 'Oxford: connected to Cambridge')."),
	S("7. Optional: Configure the Minecart waiting time in both buffers. The Minecart will then start automatically after the configured time."),
	S("8. Optional: Protect your rail network with the Protection Landmarks (one Landmark at least every 16 nodes/meters)."),
	S("9. Place a Minecart in front of the buffer and check whether it starts after the configured time."),
	S("10. Check the cart state via the chat command: /mycart <num>\n   '<num>' is the cart number"),
	S("11. Drop items into the Minecart and punch the cart to start it."),
	S("12. Dig the cart with 'sneak+click' (as usual). The items will be drop down."),
	S("13. To retrieve lost carts, use the chat command: /stopcart <num>"),
}, "\n")

local cart_doc = S("Primary used to transport items. You can drop items into the Minecart and punch the cart to get started. Sneak+click the cart to get cart and items back")

local buffer_doc = S("Used as buffer on both rail ends. Needed to be able to record the cart routes")

local landmark_doc = S("Protect your rails with the Landmarks (one Landmark at least every 16 blocks near the rail)")

local hopper_doc = S("Used to load/unload Minecart. The Hopper can push/pull items to/from chests and drop/pickup items to/from Minecarts. To unload a Minecart place the hopper below the rail. To load the Minecart, place the hopper right next to the Minecart.")

local pusher_doc = S([[If several carts are running on one route,
it can happen that a buffer position is already occupied and one cart therefore stops earlier.
In this case, the cart pusher is used to push the cart towards the buffer again.
This block must be placed under the rail at a distance of 2 m in front of the buffer.]])

local speed_doc = S([[Limit the cart speed with speed limit signs.

As before, the speed of the carts is also influenced by power rails.
Brake rails are irrelevant, the cart does not brake here.
The maximum speed is 8 m/s. This assumes a ratio of power rails
to normal rails of 1 to 4 on a flat section of rail. A rail section is a
series of rail nodes without a change of direction. After every curve / kink,
the speed for the next section of the route is newly determined,
taking into account the swing of the cart. This means that a cart can
roll over short rail sections without power rails.

In order to additionally brake the cart at certain points
(at switches or in front of a buffer), speed limit signs can be placed
on the track. With these signs the speed can be reduced to 4, 2, or 1 m / s.
The "No speed limit" sign can be used to remove the speed limit.

The speed limit signs must be placed next to the track so that they can
be read from the cart. This allows different speeds in each direction of travel.]])

local function formspec(data)
	if data.image then
		local image = "image["..(doc.FORMSPEC.ENTRY_WIDTH - 3)..",0;3,2;"..data.image.."]"
		local formstring = doc.widgets.text(data.text, doc.FORMSPEC.ENTRY_START_X, doc.FORMSPEC.ENTRY_START_Y+1.6, doc.FORMSPEC.ENTRY_WIDTH, doc.FORMSPEC.ENTRY_HEIGHT - 1.6)
		return image..formstring
	elseif data.item then
		local box = "box["..(doc.FORMSPEC.ENTRY_WIDTH - 1.6)..",0;1,1.1;#BBBBBB]"
		local image = "item_image["..(doc.FORMSPEC.ENTRY_WIDTH - 1.5)..",0.1;1,1;"..data.item.."]"
		local formstring = doc.widgets.text(data.text, doc.FORMSPEC.ENTRY_START_X, doc.FORMSPEC.ENTRY_START_Y+0.8, doc.FORMSPEC.ENTRY_WIDTH, doc.FORMSPEC.ENTRY_HEIGHT - 0.8)
		return box..image..formstring
	else
		return doc.entry_builders.text(data.text)
	end
end

doc.add_category("minecart",
{
	name = S("Minecart"),
	description = S("Minecart, the lean railway transportation automation system"),
	sorting = "custom",
	sorting_data = {"summary", "cart"},
	build_formspec = formspec,
})

doc.add_entry("minecart", "summary", {
	name = S("Summary"),
	data = {text=summary_doc, image="minecart_doc_image.png"},
})

doc.add_entry("minecart", "cart", {
	name = S("Minecart Cart"),
	data = {text=cart_doc, item="minecart:cart"},
})

doc.add_entry("minecart", "buffer", {
	name = S("Minecart Railway Buffer"),
	data = {text=buffer_doc, item="minecart:buffer"},
})

doc.add_entry("minecart", "landmark", {
	name = S("Minecart Landmark"),
	data = {text = landmark_doc, item="minecart:landmark"},
})

doc.add_entry("minecart", "speed signs", {
	name = S("Minecart Speed Signs"),
	data = {text = speed_doc, item="minecart:speed4"},
})

doc.add_entry("minecart", "cart pusher", {
	name = S("Cart Pusher"),
	data = {text = pusher_doc, item="minecart:cart_pusher"},
})

if minecart.hopper_enabled then
	doc.add_entry("minecart", "hopper", {
		name = S("Minecart Hopper"),
		data = {text=hopper_doc, item="minecart:hopper"},
	})
end