minetest_modding_book/_en/advmap/lvm.md

title	layout	root	idx	description	redirect_from	mapgen_object
Lua Voxel Manipulators	default	../..	6.2	Learn how to use LVMs to speed up map operations.	/en/chapters/lvm.html /en/map/lvm.html	level title message warning LVMs and Mapgen Don't use `minetest.get_voxel_manip()` with mapgen, as it can cause glitches. Use `minetest.get_mapgen_object("voxelmanip")` instead.

Introduction

The functions outlined in the Basic Map Operations chapter are convenient and easy to use, but for large areas they are inefficient. Every time you call set_node or get_node, your mod needs to communicate with the engine. This results in constant individual copying operations between the engine and your mod, which is slow and will quickly decrease the performance of your game. Using a Lua Voxel Manipulator (LVM) can be a better alternative.

• Concepts
• Reading into the LVM
• Reading Nodes
• Writing Nodes
• Example
• Your Turn

Concepts

An LVM allows you to load large areas of the map into your mod's memory. You can then read and write this data without further interaction with the engine and without running any callbacks, which means that these operations are very fast. Once done, you can then write the area back into the engine and run any lighting calculations.

Reading into the LVM

You can only load a cubic area into an LVM, so you need to work out the minimum and maximum positions that you need to modify. Then you can create and read into an LVM. For example:

local vm         = minetest.get_voxel_manip()
local emin, emax = vm:read_from_map(pos1, pos2)

For performance reasons, an LVM will almost never read the exact area you tell it to. Instead, it will likely read a larger area. The larger area is given by emin and emax, which stand for emerged min pos and emerged max pos. An LVM will load the area it contains for you - whether that involves loading from memory, from disk, or calling the map generator.

{% include notice.html notice=page.mapgen_object %}

Reading Nodes

To read the types of nodes at particular positions, you'll need to use get_data(). This returns a flat array where each entry represents the type of a particular node.

local data = vm:get_data()

You can get param2 and lighting data using the methods get_light_data() and get_param2_data().

You'll need to use emin and emax to work out where a node is in the flat arrays given by the above methods. There's a helper class called VoxelArea which handles the calculation for you.

local a = VoxelArea:new{
    MinEdge = emin,
    MaxEdge = emax
}

-- Get node's index
local idx = a:index(x, y, z)

-- Read node
print(data[idx])

When you run this, you'll notice that data[vi] is an integer. This is because the engine doesn't store nodes using strings, for performance reasons. Instead, the engine uses an integer called a content ID. You can find out the content ID for a particular type of node with get_content_id(). For example:

local c_stone = minetest.get_content_id("default:stone")

You can then check whether the node is stone:

local idx = a:index(x, y, z)
if data[idx] == c_stone then
    print("is stone!")
end

It is recommended that you find and store the content IDs of nodes types at load time because the IDs of a node type will never change. Make sure to store the IDs in a local variable for performance reasons.

Nodes in an LVM data array are stored in reverse co-ordinate order, so you should always iterate in the order z, y, x. For example:

for z = min.z, max.z do
    for y = min.y, max.y do
        for x = min.x, max.x do
            -- vi, voxel index, is a common variable name here
            local vi = a:index(x, y, z)
            if data[vi] == c_stone then
                print("is stone!")
            end
        end
    end
end

The reason for this touches on the topic of computer architecture. Reading from RAM is rather costly, so CPUs have multiple levels of caching. If the data that a process requests is in the cache, it can very quickly retrieve it. If the data is not in the cache, then a cache miss occurs and it will fetch the data it needs from RAM. Any data surrounding the requested data is also fetched and then replaces the data in the cache. This is because it's quite likely that the process will ask for data near that location again. This means a good rule of optimisation is to iterate in a way that you read data one after another, and avoid cache thrashing.

Writing Nodes

First, you need to set the new content ID in the data array:

for z = min.z, max.z do
    for y = min.y, max.y do
        for x = min.x, max.x do
            local vi = a:index(x, y, z)
            if data[vi] == c_stone then
                data[vi] = c_air
            end
        end
    end
end

When you finish setting nodes in the LVM, you then need to upload the data array to the engine:

vm:set_data(data)
vm:write_to_map(true)

For setting lighting and param2 data, use the appropriately named set_light_data() and set_param2_data() methods.

write_to_map() takes a Boolean which is true if you want lighting to be calculated. If you pass false, you need to recalculate lighting at a future time using minetest.fix_light.

Example

-- Get content IDs during load time, and store into a local
local c_dirt  = minetest.get_content_id("default:dirt")
local c_grass = minetest.get_content_id("default:dirt_with_grass")

local function grass_to_dirt(pos1, pos2)
    -- Read data into LVM
    local vm = minetest.get_voxel_manip()
    local emin, emax = vm:read_from_map(pos1, pos2)
    local a = VoxelArea:new{
        MinEdge = emin,
        MaxEdge = emax
    }
    local data = vm:get_data()

    -- Modify data
    for z = pos1.z, pos2.z do
        for y = pos1.y, pos2.y do
            for x = pos1.x, pos2.x do
                local vi = a:index(x, y, z)
                if data[vi] == c_grass then
                    data[vi] = c_dirt
                end
            end
        end
    end

    -- Write data
    vm:set_data(data)
    vm:write_to_map(true)
end

Your Turn

• Create replace_in_area(from, to, pos1, pos2), which replaces all instances of from with to in the area given, where from and to are node names.
• Make a function which rotates all chest nodes by 90°.
• Make a function which uses an LVM to cause mossy cobble to spread to nearby stone and cobble nodes. Does your implementation cause mossy cobble to spread more than a distance of one node each time? If so, how could you stop this?