minetest_modding_book/_en/items/nodes_items_crafting.md
2024-10-23 00:39:22 +01:00

11 KiB

title layout root idx description redirect_from
Nodes, Items, and Crafting default ../.. 2.1 Learn how to register node, items, and craft recipes using register_node, register_item, and register_craft. /en/chapters/nodes_items_crafting.html

Introduction

Registering new nodes and craftitems, and creating craft recipes, are basic requirements for many mods.

What are Nodes and Items?

Nodes, craftitems, and tools are all Items. An item is something that could be found in an inventory - even if it isn't possible through normal gameplay.

A node is an item that can be placed or be found in the world. Every position in the world must be occupied with one and only one node - seemingly blank positions are usually air nodes.

A craftitem can't be placed and is only found in inventories or as a dropped item in the world.

A tool is like a craftitem but has the ability to wear. As you use the tool, the wear bar goes down until the tool breaks. Tools can also never be stacked. In the future, it's likely that craftitems and tools will merge into one type of item, as the distinction between them is rather artificial.

Registering Items

Item definitions consist of an item name and a definition table. The definition table contains attributes that affect the behaviour of the item.

core.register_craftitem("modname:itemname", {
    description = "My Special Item",
    inventory_image = "modname_itemname.png"
})

Item Names

Every item has an item name used to refer to it, which should be in the following format:

modname:itemname

The modname is the name of the mod in which the item is registered, and the item name is the name of the item itself. The item name should be relevant to what the item is and can't already be registered.

Both modname and itemname should only contain lowercase letters, numbers, and underscores.

Item Aliases

Items can also have aliases pointing to their name. An alias is a pseudo-item name that results in the engine treating any occurrences of the alias as if it were the item name. There are two main common uses of this:

  • Renaming removed items to something else. There may be unknown nodes in the world and in inventories if an item is removed from a mod without any corrective code.
  • Adding a shortcut. /giveme dirt is easier than /giveme default:dirt.

Registering an alias is pretty simple. A good way to remember the order of the arguments is from → to where from is the alias and to is the target.

core.register_alias("dirt", "default:dirt")

Mods need to make sure to resolve aliases before dealing directly with item names, as the engine won't do this. This is pretty simple though:

itemname = core.registered_aliases[itemname] or itemname

Textures

Textures should be placed in the textures/ folder with names in the format modname_itemname.png.\ JPEG textures are supported, but they do not support transparency and are generally bad quality at low resolutions. It is often better to use the PNG format.

Textures in Minetest are usually 16 by 16 pixels. They can be any resolution, but it is recommended that they are in the order of 2, for example, 16, 32, 64, or 128. This is because other resolutions may not be supported correctly on older devices, especially phones, resulting in degraded performance.

Registering a basic node

Registering nodes is similar to registering items, just with a different function:

core.register_node("mymod:diamond", {
    description = "Alien Diamond",
    tiles = {"mymod_diamond.png"},
    is_ground_content = true,
    groups = {cracky=3, stone=1}
})

Node definitions can contain any property in an item definition, and also contain additional properties specific to nodes.

The tiles property is a table of texture names the node will use. When there is only one texture, this texture is used on every side. To give a different texture per-side, supply the names of 6 textures in this order:

up (+Y), down (-Y), right (+X), left (-X), back (+Z), front (-Z).
(+Y, -Y, +X, -X, +Z, -Z)

Remember that +Y is upwards in Minetest, as is the convention with most 3D computer games.

core.register_node("mymod:diamond", {
    description = "Alien Diamond",
    tiles = {
        "mymod_diamond_up.png",    -- y+
        "mymod_diamond_down.png",  -- y-
        "mymod_diamond_right.png", -- x+
        "mymod_diamond_left.png",  -- x-
        "mymod_diamond_back.png",  -- z+
        "mymod_diamond_front.png", -- z-
    },
    is_ground_content = true,
    groups = {cracky = 3},
    drop = "mymod:diamond_fragments"
    -- ^  Rather than dropping diamond, drop mymod:diamond_fragments
})

The is_ground_content attribute allows caves to be generated over the stone. This is essential for any node which may be placed during map generation underground. Caves are cut out of the world after all the other nodes in an area have generated.

Crafting

There are several types of crafting recipe available, indicated by the type property.

  • shaped - Ingredients must be in the correct position.
  • shapeless - It doesn't matter where the ingredients are, just that there is the right amount.
  • cooking - Recipes for the furnace to use.
  • fuel - Defines items which can be burned in furnaces.
  • tool_repair - Defines items which can be tool repaired.

Craft recipes are not items, so they do not use Item Names to uniquely identify themselves.

Shaped

Shaped recipes are when the ingredients need to be in the right shape or pattern to work. In the example below, the fragments need to be in a chair-like pattern for the craft to work.

core.register_craft({
    type = "shaped",
    output = "mymod:diamond_chair 99",
    recipe = {
        {"mymod:diamond_fragments", "",                         ""},
        {"mymod:diamond_fragments", "mymod:diamond_fragments",  ""},
        {"mymod:diamond_fragments", "mymod:diamond_fragments",  ""}
    }
})

One thing to note is the blank column on the right-hand side. This means that there must be an empty column to the right of the shape, otherwise this won't work. If this empty column shouldn't be required, then the empty strings can be left out like so:

core.register_craft({
    output = "mymod:diamond_chair 99",
    recipe = {
        {"mymod:diamond_fragments", ""                       },
        {"mymod:diamond_fragments", "mymod:diamond_fragments"},
        {"mymod:diamond_fragments", "mymod:diamond_fragments"}
    }
})

The type field isn't actually needed for shaped crafts, as shaped is the default craft type.

Shapeless

Shapeless recipes are a type of recipe which is used when it doesn't matter where the ingredients are placed, just that they're there.

core.register_craft({
    type = "shapeless",
    output = "mymod:diamond 3",
    recipe = {
        "mymod:diamond_fragments",
        "mymod:diamond_fragments",
        "mymod:diamond_fragments",
    },
})

Cooking and Fuel

Recipes with the type "cooking" are not made in the crafting grid, but are cooked in furnaces, or other cooking tools that might be found in mods.

core.register_craft({
    type = "cooking",
    output = "mymod:diamond_fragments",
    recipe = "default:coalblock",
    cooktime = 10,
})

The only real difference in the code is that the recipe is just a single item, compared to being in a table (between braces). They also have an optional "cooktime" parameter which defines how long the item takes to cook. If this is not set, it defaults to 3.

The recipe above works when the coal block is in the input slot, with some form of fuel below it. It creates diamond fragments after 10 seconds!

This type is an accompaniment to the cooking type, as it defines what can be burned in furnaces and other cooking tools from mods.

core.register_craft({
    type = "fuel",
    recipe = "mymod:diamond",
    burntime = 300,
})

They don't have an output like other recipes, but they have a burn time which defines how long they will last as fuel in seconds. So, the diamond is good as fuel for 300 seconds!

Groups

Items can be members of many groups and groups can have many members. Groups are defined using the groups property in the definition table and have an associated value.

groups = {cracky = 3, wood = 1}

There are several reasons you use groups. Firstly, groups are used to describe properties such as dig types and flammability. Secondly, groups can be used in a craft recipe instead of an item name to allow any item in the group to be used.

core.register_craft({
    type = "shapeless",
    output = "mymod:diamond_thing 3",
    recipe = {"group:wood", "mymod:diamond"}
})

Tools, Capabilities, and Dig Types

Dig types are groups which are used to define how strong a node is when dug with different tools. A dig type group with a higher associated value means the node is easier and quicker to cut. It's possible to combine multiple dig types to allow the more efficient use of multiple types of tools. A node with no dig types cannot be dug by any tools.

Group Best Tool Description
crumbly spade Dirt, sand
cracky pickaxe Tough (but brittle) stuff like stone
snappy any Can be cut using fine tools;
e.g. leaves, smallplants, wire, sheets of metal
choppy axe Can be cut using a sharp force; e.g. trees, wooden planks
fleshy sword Living things like animals and the player.
This could imply some blood effects when hitting.
explody ? Especially prone to explosions
oddly_breakable_by_hand any Torches and such - very quick to dig

Every tool has a tool capability. A capability includes a list of supported dig types, and associated properties for each type such as dig times and the amount of wear. Tools can also have a maximum supported hardness for each type, which makes it possible to prevent weaker tools from digging harder nodes. It's very common for tools to include all dig types in their capabilities, with the less suitable ones having very inefficient properties. If the item a player is currently wielding doesn't have an explicit tool capability, then the capability of the current hand is used instead.

core.register_tool("mymod:tool", {
    description = "My Tool",
    inventory_image = "mymod_tool.png",
    tool_capabilities = {
        full_punch_interval = 1.5,
        max_drop_level = 1,
        groupcaps = {
            crumbly = {
                maxlevel = 2,
                uses = 20,
                times = { [1]=1.60, [2]=1.20, [3]=0.80 }
            },
        },
        damage_groups = {fleshy=2},
    },
})

Groupcaps is the list of supported dig types for digging nodes. Damage groups are for controlling how tools damage objects, which will be discussed later in the Objects, Players, and Entities chapter.